Epoxy resin pigment powder 8 oz (226 g) per bottle

Description

PRODUCT DESCRIPTION:
Vantage Metallic Pigments are designed to be mixed with 100% solid epoxy or polyurethanes,
acrylic sealers and polyaspartics. They are versatile, eye-catching and increasingly utilized in a
wide range of applications such as protective coatings, automotive OEM and refinish coatings.
FEATURES
:
Multiple colors
Multi-packages
Extreme vibrancy and shimmer radiance
Unlimited color variations via color mixed
Can be used in most Resin
Long shelf life and stable in storage
Customizable
Artisan Friendly
Easy to use
SOLIDS BY WEIGHT and VOLUME
: 100%
COVERAGE RATE
:
Metallic pigment Mixed
Coating Material
Coverage Area
(Square Feet)
4 oz 1 gallon 75 - 100 ft²
8 oz 2 gallon 150 - 200 ft²
12 oz 3 gallon 225 - 300 ft²
16 oz 4 gallon 300 - 400 ft²
SHELF LIFE
: 5 years in unopened containers that are stored properly
PRODUCT STORAGE: Store product in a cool and dry area away from direct sunlight. DO NOT
let water into metallic pigment packaging.
IDEAL CONDITIONS
: Apply material when temperature is decreasing. DO NOT apply under
direct sunlight(excluding UV stable series) or inclement weather.
MIXED MATERIALS:
Any liquid material or semi-liquid material can be pigmented. Examples:
• Epoxy Resin
• Casting Resin
• Polyaspartics
• 91% Isopropyl Alcohol
• Patch Paste
DOT CLASSIFICATIONS
:“not regulated”
CURE SCHEDULE
:
Dependent on binder system used.
SAFETY:
Review current Safety Data Sheet(s) and all relevant documentation before installation.
PRIMER:
Primers can vary byproduct and color
TOPCOAT
:
The binder system with the addition of the Metallic Color Pigment can be the finish coat.
However, in some applications, a clear topcoat can be utilized. To protect the finished surface, a
high performance floor finish or wax can be utilized in conjunction with regular cleaning and
buffing.
SURFACE PREPARATION
: Before installing, substrate must be clean, profiled, and sound. The
most suitable surface preparation would be surface profiling with a floor grinder. However, a fine
brush blast (shot blast) to remove all laitance can be used as well. If shot blasting, a CSP-2 or CSP-
3 is ideal and will help to avoid corn rows that can detract from the look of the floor. A smooth
but slightly profiled surface will provide the best results. All dirt, foreign contaminants, oil and
laitance must be removed to assure a trouble free bond to the substrate. A test should be made
to determine that the concrete is dry; this can be done by placing a 4’X4’ plastic sheet on the
substrate and taping down the edges. If after 24 hours, the substrate is still dry below the plastic
sheet, then the substrate is generally dry enough to start coating. The plastic sheet testing is also
a good method to determine if any hydro-static pressure problems exist that may later cause
disbonding.
PRIMING and SURFACE REPAIRS
: Before priming, repair any cracks, holes or other
imperfections. The primer selection is an important component of the system application. Each
primer color selection will provide a different look even when the same metallic color pigment is
used. Generally dark color primers will provide the best results. Although you can experiment
with different primer colors, we recommend that a black primer be used initially in your
evaluations, as this will allow you to make your offerings more standardized.
PRODUCT MIXING
: Use one 8 OZ container of Metallic Color Pigment for 2 mixed gallon or
each mixed 3 gallon of the clear binder, dependent on the opacity desired. Mix the pigment in
well with a slow speed mixing equipment to avoid mixing in air.
PRODUCT APPLICATION
: Although many binders can be utilized, a clear epoxy binder is the
preferred choice. The recommended coverage rate is 75 to 100 square feet per gallon. This
coverage rate will generally ensure that the pigment will achieve the desired look by allowing the
pigments in the binder to create their patina. If the coating is applied too thin, the pigments will
not flow properly and the patina will not develop correctly. Mix only a kit size that can be applied
within the usable pot life of the product to be utilized. Applications are best performed using a
¼” notched squeegee or flexible flat squeegee. This application technique will ensure a uniform
application rate. After the clear binder with the metallic color pigment has been applied, back
roll the surface with a lint free roller to insure a uniform coverage and thickness. Once the
coating evenly covers the substrate it is time to freely swirl the roller in a random figure-eight
motion to mimic the look of natural stone or rock formations. Depending on the final look
desired, various finishing techniques can be used to provide different results dependent on the
viscosity of the binder used. For a low viscosity binder, back rolling the surface will be all that is
needed; but in some cases, you may want to perform some additional finishing steps. The first
technique would be to use a small foam roller and finish by randomly swirling the finish into the
floor. Many of these swirl marks will dissipate, but some will remain and leave a unique patina.
This foam roller swirl technique can work well with either a low viscosity binder or a medium
viscosity binder. For a high viscosity binder where the product will not level back out correctly
from a foam roller swirl technique, another application technique can be employed. This
technique involves the use of a solvent, such as denatured alcohol to create various visual
effects. The alcohol is best applied using a handheld trigger spray bottle using a course spray
setting. As the spray droplets drop to the surface, the surface tension will change and create
different patina patterns. This spray method can also be used for thin applications (8 mils or less)
to provide a hammer look. Note: The addition of the metallic pigments can create air and
migration of pigments can cause surface defects and air release during cure. Different roller
techniques can also generate air that may not dissipate. Experimentation is the best way to
develop a technique for applications as many characteristics can be achieved through different
techniques of application.
RECOAT OR TOPCOATING
: For enhanced durability, smooth texture and/or a semi-gloss or
matte finish, the dried Metallic Pigment coating surface can be lightly screened or sanded and a
clear topcoat may be applied. Although the applied Metallic Color Pigment and binder system
can be the final coat, many clear coatings such as urethanes can be used to protect the unique
surface created. If there is too much texture in the floor, dependent on primer application, a light
sanding to knock down the high spots, followed by another application of the clear binder
(without pigments) can be applied.